Extreme Customization and Reliability
Compact and elegant, Mimosa’s point-to-multipoint (PTMP) solutions enable operators to provide fiber-fast connectivity to residential and business subscribers. Providing the highest bandwidth per client deployments in the extended frequency range from 4.9 up to 6.4 GHz, it integrates GPS sync for spectrum reuse
Tower (Long-Range)
Architecture
Supports massive scaling of subscribers and capacity at existing towers, as well as easy build-out of new tower locations closer to potential subscribers—all by smartly A5c reusing scarce wireless spectrum resources.
MicroPoP (Short-Range) Architecture
Designed for dense urban and suburban neighborhoods, our multipoint solution targets 250-500 Mbps speeds. Disruptively priced, and powerful enough to compete against DSL, cable, and FTTH.
Amazing Access All Around
The Mimosa A5 access point delivers cutting-edge multipoint technology for service providers to affordably deliver gigabit wireless broadband. Designed for high-density, short-range applications, the A5 features advanced interference reduction techniques to enable service in underserved markets.
UNPARALLELED ACCESS
With access point capacity of 1+ Gbps (IP) , the A5 delivers the speed users need at a fraction of the cost of delivering fiber
SMART QUAD-PANEL MIMO First directional MIMO technology with four 90 degree panels
SPECTRUM REUSE SYNC
Smartly reuse channels across the network, leveraging GPS technology
BEAUTIFULLY COMPACT
Discrete form factor for suburban rooftop and urban installations
EASY SET UP
Simple configuration and management from a smartphone; Quickly install client devices with auto-unlocking and provisioning.
ULTRA RUGGED
Carrier-grade IP67 design to withstand the harshest conditions
NOISE RESISTANT
Combat noise with advanced Automatic Gain Control (AGC)
WIDE FREQUENCY SUPPORT
4.90 to 6.40 GHz* frequency range in SRS mode, where allowed by country regulations
SHORT LINKS
Industry-leading performance for high-density, short-range multipoint applications
POWER
30 dBm
POE
802.3at and 48-56 V passive POE compliant with integrated IEC61000-4-5 surge protection
Super for Sectors
With fast client speeds and great access point capacity, along with local and network-wide spectrum reuse, the connectorized Mimosa A5c delivers the highest possible scale for any unlicensed fixed wireless network. The A5c is perfectly suited for PTMP applications.
INCREASED CAPACITY AT EACH SITE
With integrated, high-precision GPS Sync technology, A5c access points can reuse the same channel, saving scarce spectrum
FIBER SPEEDS
Client speeds of 500+ Mbps (IP) and access point speeds of 1+ Gbps (IP)
NOISE RESISTANT
Combat noise with advanced Automatic Gain Control (AGC)
PUBLIC SAFETY FRIENDLY
Supports Public Safety bands (4.90 GHz)
EASY SET UP
Simple configuration and management from a smartphone; Quickly install client devices with auto-unlocking and provisioning
MASSIVE SECTOR CAPACITY
First outdoor 4×4:4 solution leveraging advanced antenna beamforming for superior performance
WIDE FREQUENCY SUPPORT
4.90 to 6.40 GHz* frequency range in SRS mode where allowed by country regulations
LONG-RANGE LINKS
Industry-leading performance for mid and long-range multipoint applications
POWER
30 dBm
POE
802.3at and 48-56 V passive POE compliant with integrated IEC61000-4-5 surge protection
Reject Noise and Synchronize
Overcoming noise at tower sites is key to scaling capacity. The N5-45×2 delivers industry-leading side lobe rejection and an unprecedented 43 dB front-to-back (FTB) performance — the highest FTB ratio of any sector or horn antenna in the industry. Compatible with any third-party, 2×2 MIMO radio solution, there’s no higher performance antenna in the industry.
Wideband Operation
Supporting 4.9 GHz public safety applications and multipoint licensed operation up to 6.4 GHz, where regulations allow, the N5-45×2 provides an additional 800 MHz of spectrum beyond the crowded 5.15–5.85 GHz unlicensed channels.
All the gain and ground coverage of a sector. All the sidelobe rejection of a horn.
The Mimosa N5-45×2 is the industry’s first sector antenna to deliver the best of both worlds — incredible noise rejection and long-distance performance, with wideband 4.9–6.4 GHz operation for fixed wireless broadband. The dual-slant polarization, 45º sector can be used with any third-party 2×2 MIMO radio solution, or two N5-45×2 antennas can be connected to the 4×4 MIMO Mimosa A5c access point, aimed in different directions, for 2x spectrum reuse, superior range and noise rejection at collocation and tower sites.
Go the Distance
The Mimosa N5-45×2 offers the best of both worlds — a long distance, high gain sector with the superior noise isolation of a horn. Competitive sectors offer high-gain, but fail to reduce side lobe and front-to-back noise. Symmetric horn antennas achieve good noise isolation, but typically offer lower gain and inefficient symmetrical ground coverage patterns.
Compatible with Third-Party Radios
Blending the best of sector antennas with the best features of a horn, the Mimosa N5-45×2 is a great sector antenna choice to use with any 2×2 MIMO radio. Even better, the ultra-wide 9º vertical beamwidth covers substantially more ground than other leading sector antennas.
